Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

U Tube Heat Exchangers in Saudi Arabia

natty

U Tube Heat Exchangers:

We are engaged in providing U Tube Type Heat Exchangers. These heat exchangers are manufactured by the experts in adhere with the international standards. The offered heat exchangers have less pressure drop and lower energy costs. Before the end delivery, U tube heat exchangers are thoroughly checked by the quality analysers on varied parameters to ensure their flawlessness. API Heat Transfer manufactures several variations of these heat exchangers. Both the Type 500 and Hub-Design are available in U-Tube configurations.

Image:

http://u tube heat exchangers

Process:

U tube heat exchangers are developed from best grade materials along with the employment of sophisticated technologies in order to integrate them with superior inbuilt protection against damage due to inherent forces occurred at the time of heating and cooling vessel. To optimize the functioning of the exchangers, these are incorporated with tube bundles, shells, baffles, tube sheets and inlet & outlet plenum. This system is highly protected even under extreme thermal cycling, when one bundle is free to float at one end. However, to address the very basic of needs for industrial heating and cooling applications, the Model BWS and BW U-Tube heat exchangers offer highly standardized construction at a very attractive price. The BWS is designed for water-to-steam, while the BW is built for water-to-water service. Two and four pass designs are common because the fluid can enter and exit on the same side. This makes construction much simpler. There are often baffles directing flow through the shell side so the fluid does not take a short cut through the shell side leaving ineffective low flow volumes. These are generally attached to the tube bundle rather than the shell in order that the bundle is still removable for maintenance. Counter current heat exchangers are most efficient and they allow the highest log mean temperature difference between the hot and cold streams.

Specifications:

  1. Frame and Pressure plate available in Carbon steel / CS gladded with SS
  2. Capacity from 500 LPH to 200000 LPH for beverage and other food and chemical Products for instant chilling and heating
  3. Plates are available in SS 304 / SS 316 / SS 316 L / Titanium
  4. Gaskets are available in Nitrite / EPDM / Viton depending on temperature

Features:

  1. Precise functionality
  2. Superior cooling and heating
  3. No operation damage
  4. Low fuel consumption
  5. No space wasting
  6. Easy to install & maintain
  7. Corrosion resistant
  8. Leak proof structure

Advantages:

  1. Longer life cycle
  2. Massive output parameters coming out of small input parameters
  3. Quick response during the starting process
  4. Regulation on the output in the range from 0 to 100%
  5. Water heating on high temperatures (huge temperature differences)

Applications:

  1. Boiler feed water preheating
  2. Water heating with steam
  3. Preheating boiler feed water
  4. Glycol cooling
  5. Oil cooling
  6. Condensate cooling
  7. Cooling tower trim cooling
  8. Refrigeration