Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers-Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Tags: emergency cooling tower

  • /
    • Tag:
  • emergency cooling tower

INLET LOUVRES

AIR INLET LOUVRES FOR COOLING TOWERS PREVENT WATER SPLASH – OUT Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the...

Wet Cooling Tower

Efficient technology for high-performance solutions                    Wet cooling offers an outstanding performance by taking full advantage of the ambient air humidity. Wet cooling, also called evaporative cooling, enables to obtain a re-cooled water temperature at least 20°C lower as compared to a radiator. As turbine output...

Air Receiver Tank

AIR RECEIVER TANK                                     Absolutely essential to any compressed air system, air receiver tanks not only serve as temporary storage, but they also allow your system to perform more efficiently. Because of the immense pressure they contain and because of their importance to an air...

Cooling Tower PVC Fills

COOLING TOWER PVC FILLS We provide PVC Fill is high on demand in the national and international markets. PVC Fill is fabricated using highly advanced technology thus ensuring its supreme quality and durability. Manufactured in accordance with international quality standards, PVC Fill dispatched by us is the best available in the markets....

Drift Eliminator

Drift Eliminator Drift eliminators are designed to capture large water droplets caught in the cooling tower air stream. The eliminators prevent the water droplets and mist from escaping the cooling tower. Cooling Tower Drift eliminators and  drift eliminators are created to pull out droplets of water from the air and lower the loss of processed...

Process heat exchangers

Process Heat Exchangers With over 50 years of experience in the field of Heat Exchange Tipo Heat Exchangers can address and resolve all of your needs in air-cooled heat exchange. Tipo Heat Exchangers designs and manufactures air-cooled heat exchangers (ACHE)- also called air cooler , and finned tubes and can offer their products to chemical,...

Forced  draft  cooling  towers

COOLING TOWERS INTRODUCTION Forced draft cooling towers are specially designed to handle zinc sulphate solutions or highly corrosive liquids. They are equipped with distribution in highly resistant material. The machines and processes of industry, as well as those devoted to human comfort and well being generated tremendous amounts of heat, which...

Cooling tower condenser water

Cooling Tower and Condenser Water Design Part 1: The Refrigeration Cycle Cooling towers are simple mechanisms.  Their operation is based on the natural occurrence of evaporative cooling – something most of us have experienced daily since the first time we got wet and felt a chill. But despite their simplicity, cooling towers play a crucial...

Radiator

For other uses, see Radiator (disambiguation). Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plant or any similar use of such an engine. Internal combustion engines are often cooled by circulating a liquid...

Air Blast Oil Cooler

For fulfilling the needs of the diverse industrial sectors, we are engaged in manufacturing, exporting and supplying our clients a broad array of Air Blast Oil Cooler. This oil cooler is manufactured in synchronization with predefined industry standards with the help of advanced technique using optimal quality components under proper experts’...

Direct-Contact Heat Exchangers

ABOUT DIRECT-CONTACT HEAT EXCHANGERS: In a Direct-Contact Heat Exchangers, two fluid streams come into direct contact, exchange heat, and are then separated. Common applications of a direct-contact exchanger involve mass transfer in addition to heat transfer, such as in evaporative cooling and rectification; applications involving only sensible...

Field Erected Pultruded Frp Cooling Towers

Field Erected Pultruded FRP Cooling Towers Tipo Heat Exchangers made of Pultruded Fiberglass are the best solution in Worst Industrial environment. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardware. Pultruded Fiberglass Reinforced Polyester ( FRP ) is becoming...

Water Cooled Chiller

Tipo Heat Exchangers range of water cooled water chiller represents the ideal solution for the water cooling of Industrial process Water Systems & designed to facilitate quick installation. We offer water cooled chilled water plants in sizes ranging from 5-Tr to 150 -Tr . These water chillers system find application in brine chilling, glycol...

RCC Cooling Tower

RCC Cooling Towers We are manufacturing Induced draft Cooling Tower in RCC Construction also both in Cross Flow and Counter Flow design. Since the structure of Cooling Tower is complete with RCC, the tower life will be more than timber as well as FRP. All other internal fills and Drift Eliminators are PVC / TIMBER […]

U-Tube Heat Exchangers

U  – Tube Heat Exchangers Shell and tube heat exchanger As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the […]

Condensers

A properly designed Graham Condenser between the process and vacuum producing equipment will yield significant advantages. The use of a process vacuum condenser can permit significant reduction in the size of the vacuum producing equipment. A condenser can recover for reuse valuable product that’s carried from the process with non-condensable...

Remote Sump Tanks

Remote Sump Tanks  Remote sump tanks can be added to cooling tower,  closed circuit cooling tower, or evaporative condenser systems. Remote sump tanks are often installed indoors in a heated space to prevent freezing of the recirculating water during cold weather operation.  Because the recirculating water is quickly drained from the unit when...

Maximum Entering Water Temperature

Maximum Entering Water Temperature As previously stated, typical HVAC conditions call for an entering water temperature of approximately 95ºF (35.0ºC). All BAC Cooling Towers are capable of withstanding temperatures of at least 120ºF (48.9ºC) with standard fill materials. For applications where the entering water temperature exceeds 120ºF...

Maintenance of cooling towers

                                                           Cooling Tower A cooling tower extracts heat from water by evaporation.  In an evaporative cooling tower, a small portion of the water being cooled is allowed to evaporate into a moving air stream to provide significant cooling to...

COOLING TOWER TERMS

COOLING TOWER TERMS Cooling Range The difference in temperature between the hot water entering the tower and the cold water leaving the tower is the cooling range. Approach The difference between the temperature of the cold water leaving the tower and the wet bulb temperature of the air is known as the approach Wet bulb […]

Closed circuit Cooling Towers

Closed circuit Cooling Towers Closed circuit Cooling Towers are hybrids that pass the working fluids through a tube bundle, upon which clean water is sprayer and a fan-induced draft applied. The resulting heat transfer. performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protection […]

Chillers and Chiller Systems

Chillers and Chiller Systems The Modern Industrial Chiller is basically a cooling system that removes heat from one element (water/glycol/air) and deposits into another (ambient air or water). The standard design is a system that cools 60° F water (water/glycol, or air) to 50° F and deposits the heat into the ambient air at 95° […]

Air Cooled Heat Exchanger

The right heat exchanger (HX) requires some knowledge of the different heat exchanger types, as well as the environment in which the unit must operate. Typically in the manufacturing industry, several differing types of heat exchangers are used for just the one process or system to derive the final product. For example, a kettle HX […]

Counter Flow Cooling Tower

Counter Flow Cooling Tower Cooling Tower Selection: Cooling towers are designed and manufactured in many sizes and configurations. Recognizing and understanding the different configurations and advantages is essential for specifying the most cost effective solution for the end user. The purpose of this bulletin is to highlight the differences...

Fanless Filles Cooling Towers

Fanless Filles Cooling Towers The name “FAN LESS FILL LESS”says it all. Devoid of either the fan or the fill media these towers are guaranteed for 100% savings in power & maintenance down time. Technical Function The Hot water from the heat source is circulated to the inlet header of the Cooling Tower. The inlet […]

Heat Exchanger

Heat Exchangers Although double-pipe heat exchangers( heat exchangers) are the simplest to design, the better choice in the following cases would be the helical-coil heat exchanger. The main advantage of the HCHE, like that for the SHE, is its highly efficient use of space, especially when it’s limited and not enough straight pipe can be...

Adiabatic Cooling System

Adiabatic Cooling System OVERVIEW  – Adiabatic Cooling System For halocarbon refrigerant condensing or CO2 gas cooling applications in supermarket refrigeration systems. PLOT YOUR COURSE TO SUSTAINABILITY – Adiabatic Cooling System The Record Vector Adiabatic Cooling System enhances the utility of an air cooled system with the...

Evaporative Fluid Coolers

OVERVIEW Copper Coil Models Now Available! MH Fluid Coolers Expand Product Offering – Evaporative Fluid cooler The MH Fluid Cooler remains one of the most efficient systems and best choices for industrial and HVAC closed-loop applications. By keeping the process fluid in a clean, closed loop, and combining the function of a cooling tower and...

Plate type heat exchangers

Plate type heat exchangers: Plate heat exchangers are composed of many thin, slightly separated plates that have very large surface areas and small fluid flow passages for heat transfer. Advances in gasket and brazing technology have made the plate-type heat exchanger increasingly practical. In HVAC applications, large heat exchangers of this type...

FRP Chemical Tank

PP FRP Storage Tank We design, manufacture and install PP FRP Storage Tanks. These are fabricated out of industrial plastics like PP, FRP, PVC/FRP, PP/FRP, PVDF/FRP, FRB, and FRVE etc of various shapes & sizes as per client’s operational requirements. Product Description: We are one of the leading supplier and manufacturer of exclusive...

Plate Heat Exchanger

Plate Heat Exchangers A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. Technical Capacities […]

Drift Eliminator

Drift Eliminator In every cooling tower there is a loss of water to the environment due to the evaporative cooling process. This evaporation is usually in the form of pure water vapor and presents no harm to the environment Drift, however, is the undesirable loss of liquid water to the environment via small droplets that […]

Cooling Tower Nozzle

Cooling Tower Nozzle Tipo Heat Exchangers nozzle is designed to discharge water spray into a confined area. The discharge pattern is long and narrow and will effectively protect long, narrow, passageways which are limited in height. We have availability of different make cooling tower spares and nozzle. Although designed to protect water cooling...

Helical-coil heat exchangers

OVERVIEW: Although double-pipe heat exchangers(Helical-coil heat exchangers) are the simplest to design, the better choice in the following cases would be the helical-coil heat exchanger (HCHE): The main advantage of the HCHE, like that for the SHE, is its highly efficient use of space, especially when it’s limited and not enough straight pipe...

Cooling Tower Sprinklers

Cooling Tower Sprinklers We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2″ to 12″ with 4 way sprinkler; these are Good quality, reliable in use. Sprinkler Assembly The sprinkler assembly is constructed of 100% non corrosive material. Mounted...

Wooden Cooling Tower

Wooden Cooling Towers This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The tower structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh...

Shell & Tube Heat Exchangers

A shell and tube heat exchanger is a class of heat exchanger designs.  It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a […]

oil cooler

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object […]

Finned Tube Heat Exchanger

Finned Tube Heat Exchangers Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat […]

Square Type Cooling Tower

Cooling Towers are basically regarded as heat rejection devices that extract waste heat from the atmosphere through the cooling of water stream to a lower temperature. They are bringing in use for air conditioning and indirect heat rejection equipment. Drycool is known for supplying well appreciated towers by the customers globally. Available in...

Dry Cooling Tower

Dry cooling towers are designed and selected through software providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. Dry cooling towers are best suited for applications such as Furnace coil water cooling, D/G Sets,...

Heat Exchangers

HEAT EXCHANGERS Large surface areas and corrugated plates allow   heat exchangers to transfer heat very efficiently. Each plate is pressed with a chevron-shaped design to create high turblent flow, excellent fluid distribution, and to increase surface area. The fluid passages between plates can be very wide, reducing fouling rates...

Cross Flow Cooling Tower

Principle The air flows horizontally and the water falling downwards meets the air at different temperatures. Therefore the heat transfer is not always optimized. Area The area required is larger due to its constructional features like larger plenum chamber. Also the arrangement and material of the pack is different and requires a higher area. Air...
1 … 3 4 5