Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers-Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Tags: cooling tower Malaysia

  • /
    • Tag:
  • cooling tower Malaysia

Remote Sump Tanks

Remote Sump Tanks  Remote sump tanks can be added to cooling tower,  closed circuit cooling tower, or evaporative condenser systems. Remote sump tanks are often installed indoors in a heated space to prevent freezing of the recirculating water during cold weather operation.  Because the recirculating water is quickly drained from the unit when...

Maximum Entering Water Temperature

Maximum Entering Water Temperature As previously stated, typical HVAC conditions call for an entering water temperature of approximately 95ºF (35.0ºC). All BAC Cooling Towers are capable of withstanding temperatures of at least 120ºF (48.9ºC) with standard fill materials. For applications where the entering water temperature exceeds 120ºF...

Maintenance of cooling towers

                                                           Cooling Tower A cooling tower extracts heat from water by evaporation.  In an evaporative cooling tower, a small portion of the water being cooled is allowed to evaporate into a moving air stream to provide significant cooling to...

COOLING TOWER TERMS

COOLING TOWER TERMS Cooling Range The difference in temperature between the hot water entering the tower and the cold water leaving the tower is the cooling range. Approach The difference between the temperature of the cold water leaving the tower and the wet bulb temperature of the air is known as the approach Wet bulb […]

Closed circuit Cooling Towers

Closed circuit Cooling Towers Closed circuit Cooling Towers are hybrids that pass the working fluids through a tube bundle, upon which clean water is sprayer and a fan-induced draft applied. The resulting heat transfer. performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protection […]

Chillers and Chiller Systems

Chillers and Chiller Systems The Modern Industrial Chiller is basically a cooling system that removes heat from one element (water/glycol/air) and deposits into another (ambient air or water). The standard design is a system that cools 60° F water (water/glycol, or air) to 50° F and deposits the heat into the ambient air at 95° […]

Air Cooled Heat Exchanger

The right heat exchanger (HX) requires some knowledge of the different heat exchanger types, as well as the environment in which the unit must operate. Typically in the manufacturing industry, several differing types of heat exchangers are used for just the one process or system to derive the final product. For example, a kettle HX […]

Counter Flow Cooling Tower

Counter Flow Cooling Tower Cooling Tower Selection: Cooling towers are designed and manufactured in many sizes and configurations. Recognizing and understanding the different configurations and advantages is essential for specifying the most cost effective solution for the end user. The purpose of this bulletin is to highlight the differences...

Fanless Filles Cooling Towers

Fanless Filles Cooling Towers The name “FAN LESS FILL LESS”says it all. Devoid of either the fan or the fill media these towers are guaranteed for 100% savings in power & maintenance down time. Technical Function The Hot water from the heat source is circulated to the inlet header of the Cooling Tower. The inlet […]

Heat Exchanger

Heat Exchangers Although double-pipe heat exchangers( heat exchangers) are the simplest to design, the better choice in the following cases would be the helical-coil heat exchanger. The main advantage of the HCHE, like that for the SHE, is its highly efficient use of space, especially when it’s limited and not enough straight pipe can be...

Adiabatic Cooling System

Adiabatic Cooling System OVERVIEW  – Adiabatic Cooling System For halocarbon refrigerant condensing or CO2 gas cooling applications in supermarket refrigeration systems. PLOT YOUR COURSE TO SUSTAINABILITY – Adiabatic Cooling System The Record Vector Adiabatic Cooling System enhances the utility of an air cooled system with the...

Evaporative Fluid Coolers

OVERVIEW Copper Coil Models Now Available! MH Fluid Coolers Expand Product Offering – Evaporative Fluid cooler The MH Fluid Cooler remains one of the most efficient systems and best choices for industrial and HVAC closed-loop applications. By keeping the process fluid in a clean, closed loop, and combining the function of a cooling tower and...

Plate type heat exchangers

Plate type heat exchangers: Plate heat exchangers are composed of many thin, slightly separated plates that have very large surface areas and small fluid flow passages for heat transfer. Advances in gasket and brazing technology have made the plate-type heat exchanger increasingly practical. In HVAC applications, large heat exchangers of this type...

FRP Chemical Tank

PP FRP Storage Tank We design, manufacture and install PP FRP Storage Tanks. These are fabricated out of industrial plastics like PP, FRP, PVC/FRP, PP/FRP, PVDF/FRP, FRB, and FRVE etc of various shapes & sizes as per client’s operational requirements. Product Description: We are one of the leading supplier and manufacturer of exclusive...

Plate Heat Exchanger

Plate Heat Exchangers A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. Technical Capacities […]

Drift Eliminator

Drift Eliminator In every cooling tower there is a loss of water to the environment due to the evaporative cooling process. This evaporation is usually in the form of pure water vapor and presents no harm to the environment Drift, however, is the undesirable loss of liquid water to the environment via small droplets that […]

Cooling Tower Nozzle

Cooling Tower Nozzle Tipo Heat Exchangers nozzle is designed to discharge water spray into a confined area. The discharge pattern is long and narrow and will effectively protect long, narrow, passageways which are limited in height. We have availability of different make cooling tower spares and nozzle. Although designed to protect water cooling...

Helical-coil heat exchangers

OVERVIEW: Although double-pipe heat exchangers(Helical-coil heat exchangers) are the simplest to design, the better choice in the following cases would be the helical-coil heat exchanger (HCHE): The main advantage of the HCHE, like that for the SHE, is its highly efficient use of space, especially when it’s limited and not enough straight pipe...

Cooling Tower Sprinklers

Cooling Tower Sprinklers We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2″ to 12″ with 4 way sprinkler; these are Good quality, reliable in use. Sprinkler Assembly The sprinkler assembly is constructed of 100% non corrosive material. Mounted...

Wooden Cooling Tower

Wooden Cooling Towers This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The tower structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh...

Shell & Tube Heat Exchangers

A shell and tube heat exchanger is a class of heat exchanger designs.  It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a […]

oil cooler

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object […]

Finned Tube Heat Exchanger

Finned Tube Heat Exchangers Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat […]

Square Type Cooling Tower

Cooling Towers are basically regarded as heat rejection devices that extract waste heat from the atmosphere through the cooling of water stream to a lower temperature. They are bringing in use for air conditioning and indirect heat rejection equipment. Drycool is known for supplying well appreciated towers by the customers globally. Available in...

Dry Cooling Tower

Dry cooling towers are designed and selected through software providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. Dry cooling towers are best suited for applications such as Furnace coil water cooling, D/G Sets,...

Heat Exchangers

HEAT EXCHANGERS Large surface areas and corrugated plates allow   heat exchangers to transfer heat very efficiently. Each plate is pressed with a chevron-shaped design to create high turblent flow, excellent fluid distribution, and to increase surface area. The fluid passages between plates can be very wide, reducing fouling rates...

Cross Flow Cooling Tower

Principle The air flows horizontally and the water falling downwards meets the air at different temperatures. Therefore the heat transfer is not always optimized. Area The area required is larger due to its constructional features like larger plenum chamber. Also the arrangement and material of the pack is different and requires a higher area. Air...

Tipo cooling towers manufacturers

Leveraging on our state of the art manufacturing unit, we offer our clients quality range of Heat Exchangers. These finned tube heat exchangers and industrial heat exchangers are fabricated as per the verified industrial standards to ensure high performance at clients end. Our range is helpful for removing heat from a high-temperature fluid by...

Heat Exchangers Manufacturers in coimbatore

Welcome to Tipo Heat Exchangers: Tipo Heat Exchangers manufacturers in Coimbatore is one of the largest Heat Exchanger Manufacturer in INDIA. This company is established in the year 2015. Our range of products includes Air Cooled Heat Exchanger, Shell Tube Heat Exchanger, Finned Tube Heat Exchanger, Plate Type Heat Exchanger, Air Cooled Condenser,...

Inter cooler

Inter cooler is a heat exchanger. That means there are two or more fluids that don’t physically touch each other but a transfer heat or energy takes place between them. At wide open throttle and full boost the hot compressed air coming from a turbocharger is probably between 250 and 350 deg F depending on […]

Air Cooled Heat Exchangers

Air cooled heat exchangers are the same Air Cooling equipment. In some part of the world air cooled heat exchangers are also known as Air fin coolers.Simply says Coil Cooler,Dry Cooling Tower are the other names of Air cooled heat exchangers. It also used for Heat rejecting from a hot process fluid to the surrounding […]

Hydraulic Oil Cooler

Hydraulic Oil Cooler as one of the prominent manufacturers and exporters of the range. Wisely engineered, these coolers are manufactured to optimize heat transfers of fluids. We make use of qualitative components to develop the coolers. Our customers praise the range for its rust proof finish, durable standards and excellent functioning. Offered...

Air Blast Oil Coolers

Air Blast Oil Coolers products are ideally suited for applicable applications. Air Blast Oil Coolers are manufactured by using high grade material and sophisticated technology in compliance with quality norms of standard. These products are recognized for attractive designed and long life among customers. Offered range is widely appreciated by the...

Plate Type Heat exchangers

Plate type heat exchangers provide efficient heat transfer in compact equipment with a small footprint. The units have a flexible design and are easy to service and maintain. The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration,...

Tube Bundle Heat Exchangers

Tube Bundle heat exchangers offer the cost effectiveness and proven performance that comes with having a standard design, while easily allowing for a wide variety of options to meet specific customer requirements. This line of pre-engineered compact tube bundle heat exchangers is available in removal tube bundle designs, the later with either...

Marine Heat Exchangers

Marine Heat Exchangers Marine heat exchangers in Tipo industrial heat ex-changer and heat ex-changer that we present has been designed and developed in adherence with various international quality standards. It have a compact design and style of construction of the plate arrangement, which allows enhanced performance. The machine is easy to...

Finned Tube Heat Exchangers

Finned Tube Heat Exchangers for applications that require high heat transfer area for relatively low heat transfer fluids. The advantages of using these exchangers are that they are compact. Our integrally  exchangers can be used in refrigeration condensers as well as for oil cooling applications. The typical applications are for air heating,...

Shell and Tube Heat Exchangers

Shell and Tube Heat Exchangers Shell and Tube heat exchangers is the most common type of heat exchanger designs. As its name  implies, this type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) […]
1 … 4 5