Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers-Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Tags: Air Cooled Condenser

  • /
    • Tag:
  • Air Cooled Condenser

Microchannel heat exchangers

About Microchannel heat exchangers: Microchannel heat excahngers are heat exchangers in which (at least one) fluid flows in lateral confinements with typical dimensions below 1 mm. The most typical such confinement are microchannels, which are channels with hydraulic diameter  below 1 mm. Microchannel heat exchangers can be made from metal,...

Direct contact heat exchangers

About Direct Heat Exchangers: Direct contact heat exchangers involve heat transfer between hot and cold streams of two phases in the absence of a separating wall. Thus such heat exchangers can be classified as: Gas – liquid Immiscible liquid – liquid Solid-liquid or solid – gas Descripition: Most direct contact heat exchangers fall under the...

Phase-change heat exchangers

About Phase-change heat exchangers: Phase-change heat exchangers is to heating up or cooling down fluids in just a single phase, heat exchangers can be used either to heat a liquid to evaporate (or boil) it or used as condensor to cool a vapor  and condense  it to a liquid. In chemical plants  and refineries ,reboilers  […]

Dynamic scraped surface heat exchanger

ABOUT DYNAMIC SCRAPED SURFACE HEAT EXCHANGER: Dynamic scraped surface heat exchanger is mainly used for heating or cooling with high-viscosity products, crystallization  processes, evaporation  and high-fouling applications. Long running times are achieved due to the continuous scraping of the surface, thus avoiding fouling and achieving a...

FRP Chemical Tank

PP FRP Storage Tank We design, manufacture and install PP FRP Storage Tanks. These are fabricated out of industrial plastics like PP, FRP, PVC/FRP, PP/FRP, PVDF/FRP, FRB, and FRVE etc of various shapes & sizes as per client’s operational requirements. Product Description: We are one of the leading supplier and manufacturer of exclusive...

Plate Heat Exchanger

Plate Heat Exchangers A plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluids are exposed to a much larger surface area because the fluids spread out over the plates. Technical Capacities […]

Drift Eliminator

Drift Eliminator In every cooling tower there is a loss of water to the environment due to the evaporative cooling process. This evaporation is usually in the form of pure water vapor and presents no harm to the environment Drift, however, is the undesirable loss of liquid water to the environment via small droplets that […]

Cooling Tower Nozzle

Cooling Tower Nozzle Tipo Heat Exchangers nozzle is designed to discharge water spray into a confined area. The discharge pattern is long and narrow and will effectively protect long, narrow, passageways which are limited in height. We have availability of different make cooling tower spares and nozzle. Although designed to protect water cooling...

Double Walled Tube Heat Exchangers

ABOUT DOUBLE WALLED TUBE HEAT EXCHANGERS: Double walled tube has a purge passage coiled through the middle of the tube wall. The bi-walled tube should be used when the heat exchanger is part of critical equipment design or is primarily safety related. APPLICATIONS: When the exchanger is in contact with hazardous material i.e., cooling Tritium...

Plate and shell heat exchanger

About Plate and shell heat exchanger: A third type of heat exchanger is a plate and shell heat exchanger, which combines plate heat exchanger with shell and tube heat exchanger technologies. The heart of the heat exchanger contains a fully welded circular plate pack made by pressing and cutting round plates and welding them together. […]

Plate heat exchangers

OVERVIEW: Another type of heat exchanger is the Plate heat exchangers. These exchangers are composed of many thin, slightly separated plates that have very large surface areas and small fluid flow passages for heat transfer. Advances in gasket and brazing technology have made the plate-type heat exchanger increasingly practical. In HVCA...

Spiral heat exchangers

OVERVIEW: Spiral heat exchangers modification to the perpendicular flow of the typical HCHE involves the replacement of shell with another coiled tube, allowing the two fluids to flow parallel to one another, and which requires the use of different design calculations.These are the Spiral Heat Exchangers (SHE), which may refer to a helical (coiled)...

Helical-coil heat exchangers

OVERVIEW: Although double-pipe heat exchangers(Helical-coil heat exchangers) are the simplest to design, the better choice in the following cases would be the helical-coil heat exchanger (HCHE): The main advantage of the HCHE, like that for the SHE, is its highly efficient use of space, especially when it’s limited and not enough straight pipe...

Cooling Tower Sprinklers

Cooling Tower Sprinklers We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2″ to 12″ with 4 way sprinkler; these are Good quality, reliable in use. Sprinkler Assembly The sprinkler assembly is constructed of 100% non corrosive material. Mounted...

Wooden Cooling Tower

Wooden Cooling Towers This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The tower structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh...

Shell & Tube Heat Exchangers

A shell and tube heat exchanger is a class of heat exchanger designs.  It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a […]

oil cooler

Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object […]

Finned Tube Heat Exchanger

Finned Tube Heat Exchangers Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat […]

Square Type Cooling Tower

Cooling Towers are basically regarded as heat rejection devices that extract waste heat from the atmosphere through the cooling of water stream to a lower temperature. They are bringing in use for air conditioning and indirect heat rejection equipment. Drycool is known for supplying well appreciated towers by the customers globally. Available in...

Fin Fan Cooler

OVERVIEW: Fin fan cooler side is usually considered clean service, although some customers will specify an fin fan cooler-fouling factor as a result of airborne contaminants. Usually a fouling factor is only included for the process side of the cooler. The fouling factor is actually a resistance to heat transfer and is actually added to […]

Dry Cooling Tower

Dry cooling towers are designed and selected through software providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. Dry cooling towers are best suited for applications such as Furnace coil water cooling, D/G Sets,...

Heat Exchangers

HEAT EXCHANGERS Large surface areas and corrugated plates allow   heat exchangers to transfer heat very efficiently. Each plate is pressed with a chevron-shaped design to create high turblent flow, excellent fluid distribution, and to increase surface area. The fluid passages between plates can be very wide, reducing fouling rates...

Cross Flow Cooling Tower

Principle The air flows horizontally and the water falling downwards meets the air at different temperatures. Therefore the heat transfer is not always optimized. Area The area required is larger due to its constructional features like larger plenum chamber. Also the arrangement and material of the pack is different and requires a higher area. Air...

Tipo cooling towers manufacturers

Leveraging on our state of the art manufacturing unit, we offer our clients quality range of Heat Exchangers. These finned tube heat exchangers and industrial heat exchangers are fabricated as per the verified industrial standards to ensure high performance at clients end. Our range is helpful for removing heat from a high-temperature fluid by...

Fin Fan Cooler

Fin fan cooler is usually considered clean service, although some customers will specify an airside-fouling factor as a result of airborne contaminants. Usually a fouling factor is only included for the process side of the cooler. The fouling factor is actually a resistance to heat transfer and is actually added to the other resistances due...

Hydraulic Oil Cooler

Hydraulic oil cooler mechanical power can be generated in various ways, and electrical as well as pneumatic systems are alternatives to hydraulic power generation systems. Mechanical power is used in a variety of applications such as pumps, motors and valves. The pump converts a small amount of mechanical power into hydraulic power, the valve...

Heat Exchangers Manufacturers in coimbatore

Welcome to Tipo Heat Exchangers: Tipo Heat Exchangers manufacturers in Coimbatore is one of the largest Heat Exchanger Manufacturer in INDIA. This company is established in the year 2015. Our range of products includes Air Cooled Heat Exchanger, Shell Tube Heat Exchanger, Finned Tube Heat Exchanger, Plate Type Heat Exchanger, Air Cooled Condenser,...

Water heat exchanger

Water Heat Exchanger and other related products for the HVAC and process industries. We provide low maintenance and durable water Heat Exchanger with unique designs and high heat transfer rates. Not only will our Heat Exchanger work for your industrial or residential environment, however severe the conditions, they will require very little...

Double Pipe Heat Exchanger

A Double pipe heat exchanger is one of the simplest form of Shell and Tubular Heat Exchanger. Here, just one pipe inside another larger pipe. To make an Unit very Compact, The Arrangement is made Multiple Times and Continues Serial and Parallel flow. One fluid flows through the inside pipe and the other flows through […]

Aluminium Heat Exchanger

Aluminium Heat Exchanger is a device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix, or the fluids are directly contacted. When selecting a Aluminium Heat Exchanger technology, coolant compatibility with wetted surfaces must be considered. A copper fluid path...

CROSS FLOW COOLING TOWER

Cross flow cooling tower offer excellent, easy accessibility of all key components such as fill, drift eliminators, mechanical equipment and water distribution system. This takes out a lot of the hassle for your maintenance personnel. Tipo Heat Exchangers Cooling Towers’ cross flow cooling tower are available in various cell sizes and various...

FRP SQUARE TYPE COOLING TOWER

FRP Square Type Cooling Tower belong to the Counter-Flow Square Shaped Cooling towers. The main features of FRP Square Type Cooling Tower are even water distribution through solid nozzles, minimum drift loss, etc. Our FRP Square Type Cooling Tower is manufactured using the best quality raw-material and consumes less power. We provide FRP Square...

Inter cooler

Inter cooler is a heat exchanger. That means there are two or more fluids that don’t physically touch each other but a transfer heat or energy takes place between them. At wide open throttle and full boost the hot compressed air coming from a turbocharger is probably between 250 and 350 deg F depending on […]

Air Cooled Heat Exchangers

Air cooled heat exchangers are the same Air Cooling equipment. In some part of the world air cooled heat exchangers are also known as Air fin coolers.Simply says Coil Cooler,Dry Cooling Tower are the other names of Air cooled heat exchangers. It also used for Heat rejecting from a hot process fluid to the surrounding […]

Hydraulic Oil Cooler

Hydraulic Oil Cooler as one of the prominent manufacturers and exporters of the range. Wisely engineered, these coolers are manufactured to optimize heat transfers of fluids. We make use of qualitative components to develop the coolers. Our customers praise the range for its rust proof finish, durable standards and excellent functioning. Offered...

Air Blast Oil Coolers

Air Blast Oil Coolers products are ideally suited for applicable applications. Air Blast Oil Coolers are manufactured by using high grade material and sophisticated technology in compliance with quality norms of standard. These products are recognized for attractive designed and long life among customers. Offered range is widely appreciated by the...

Plate Type Heat exchangers

Plate type heat exchangers provide efficient heat transfer in compact equipment with a small footprint. The units have a flexible design and are easy to service and maintain. The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration,...

Tube Bundle Heat Exchangers

Tube Bundle heat exchangers offer the cost effectiveness and proven performance that comes with having a standard design, while easily allowing for a wide variety of options to meet specific customer requirements. This line of pre-engineered compact tube bundle heat exchangers is available in removal tube bundle designs, the later with either...

Marine Heat Exchangers

Marine Heat Exchangers Marine heat exchangers in Tipo industrial heat ex-changer and heat ex-changer that we present has been designed and developed in adherence with various international quality standards. It have a compact design and style of construction of the plate arrangement, which allows enhanced performance. The machine is easy to...

Finned Tube Heat Exchangers

Finned Tube Heat Exchangers for applications that require high heat transfer area for relatively low heat transfer fluids. The advantages of using these exchangers are that they are compact. Our integrally  exchangers can be used in refrigeration condensers as well as for oil cooling applications. The typical applications are for air heating,...

Shell and Tube Heat Exchangers

Shell and Tube Heat Exchangers Shell and Tube heat exchangers is the most common type of heat exchanger designs. As its name  implies, this type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) […]
1 … 23 24