Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Square Shape Cooling Towers in Dharmapuri, Tamilnadu

natty

Square Shape Cooling Towers

OVERVIEW OF SQUARE SHAPE COOLING TOWERS

Tipo heat exchangers covers a never ending range of square/rectangular cooling tower.  The term” never ending” is quoted here because of the modular attribute of the series.  These Square shape cooling towers can be made available in any capacity and of any size. The series adopts the fundamentals of induced draft counter flow operation, whereby the heated water enters the cooling tower via the inlet pipes and leaves out after lowering down the temperature. The hot water is splashed through the non clogging splash caps over the fills/packing for increasing the surface area. Simultaneously the outside dry air is induced to the cooling tower with the efforts of cooling tower motor emplaced on the top.  Due to this counter contact of water and air, the evaporation takes place resulting in the temperature drop.  The air inlets are limited to the lower part of the casing walls and the air after going through the functioning area leaves most of the entrained moisture in the new and the effective system of drift eliminators.

Square Shape Cooling Tower is of the design:

-Vertical Induced Draft Counter Flow, with a uniform distribution of water and an optimal transfer of heat
-These are used by all large industries to cool the water that has undergone recycling
-The installation of these products can be done independent of the direction of wind
-Square Shape Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature

Applications Of Square Shape Cooling Tower:

  1. Aluminium die casting m/c
  2. Air compressors
  3. A/C plant & cold rooms
  4. Blow moulding M/c
  5. Chemical industries
  6. Dairy,Citrus and other food processing industries
  7. Distilleries and Breweries plants
  8. Diesel / Gas Gensets & Megawatt Projects
  9. Glass Mfg. Plant
  10. Herbal,Aromatics & extraction plants
  11. Industries heat process
  12. Oil refineries
  13. Plastic injustion moulding m/c
  14. PVC pipes mfg.plant
  15. Soap / Cosmetic mfg. industries
  16. Steel factory and foundry

SQUARE SHAPE COOLING TOWERS CAPACITIES:

  • Square cooling tower gives 100% cooling efficiencies
  • Give good appearance flow rate from 5 M3/Hr To 550 M3/Hr gives differences in temperature 4°C To30 °C
  • Availability of Capacities from 5 TR T0 600 TR in single cell

SQUARE SHAPE COOLING TOWERS FEATURES:

  1. All structural in HDG Steel
  2. PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm
  3. TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft
  4. Adjustable pitch axial flow, dynamically balanced aluminium fans
  5. Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  6. All joints fastened with SS fasteners
  7. Uniformity in water dispersion through non – clog nozzles
  8. Capacities 10TR to 1500TR , in single cell
  9. Water flow 5 m3/h to 1000 m3/h, in single cell
  10. Delta T (Temperature drop) 4°C to 20°C, in single cell
  11. The design incorporate the static spray nozzle distribution to atomize water in to a mist state and ensure uniformity in water dispersion and are easy to maintain even during the tower operations
  12. Our cooling Tower are designed for multi-cell construction, thus offering better flexibility in tower selection and operation.
  13. The tower is reassembled in the factory, knocked down into some unit, transported to the job site, and reassembled into the final shape.

Images:

Square Shape Cooling Tower
Square Shape Cooling Tower