Split Unit Chillers
Introduction
When we are faced with an application where a water cooled chiller is not acceptable but poor ventilation prohibits the dissipation of heat from a standard air cooled chiller we look to our line of split unit chillers.
Our split unit chillers come in two pieces –
- The evaporator and
- compressor
section which is installed indoors and the condenser section which is installed outdoors. We offer our split unit chillers from 1 ton (12,000 BTU cooling capacity) up to 60 ton (720,000 BTU cooling capacity).
Split Unit Chiller Key Features
- ETL listed
- Remote condenser section
- Microprocessor Controller
- Suction accumulator
- Water flow switch
applications of Split Unit Chillers:
standard and custom units have been used for applications in all industries, notably:
- Dynamo-meters
- Presses
- Mining
- Injection Molding
- Extrusion
- Blow Molding
- Laser Cutting
- Welding
- Optics
- High Altitude
- MRI Cooling
- Linear Accelerator Cooling
- Medical Chillers
- Military
- Chemical & Pharmaceutical
- Breweries, Wineries, Food Processing
- Jacketed Vessels
- Laboratories
- Machine Tools
- Printers
- Hydraulic Cooling
- Data Center Cooling
Features:
- ETL listed
- Remote condenser section
- Microprocessor Controller
- Industrial duty system process pump
- Stainless Steel, brazed plate evaporator with insulation, and secured in a steel bracket (Models ACCSTP160 thru ACCSTP225 use shell & tube exchanger)
- Scroll compressor with crankcase heater
- Suction accumulator
- Water flow switch
- Hot gas by-pass capacity control
- 24V control transformer
- Direct drive condenser fan motor
- Rust resistant, high CFM, aluminum condenser fan blade
- Condenser(s): copper tube / aluminum fin
- Compressor motor contactor
- Condenser motor and control circuit fusing
- “Hard start kit” (single phase units only)
- Painted, galvanized sheet metal cabinet
- Insulation on all water and refrigerant lines
- Liquid line drier, sight glass, solenoid, TEV
- Full refrigerant charge from factory
- Stainless Steel storage tank with insulation (Optional)
- Fused Stainless Steel re-circulation pump for tank operation with ball valve and cleanable strainer (Optional)
- Tank pressure relief valve, vent and drain connections (Optional)
Technical Specification:
- Cooling capacity: 6.6 KW
- 3-speed motor
- hoses, hydraulic and electrical connection
- Fins adjustable air outlet 45/90 °
- 30 mt. Max distance between indoor and outdoor units
- Operation range unit: 10-30 ° C
- Operation range unit estarna: 10-40 ° C
- Quiet Operation
- High and low pressure
- Cooling capacity (26 ° C 55% IN, OUT 30 ° C): 6.7 kW
- Cooling capacity (26 ° C 55% IN, 30 ° C OUT): 22900 BTU / h
- Power consumption (26 ° C 55% IN, OUT 30 ° C): 2600 W
- Current consumption (26 ° C 55% IN, OUT 30 ° C): 12 A
- Indoor airflow as a function of speed:
- – Maximum speed of 1500 cm / h
- – Average speed 1400 cm / h
- – Low speed 1150 cm / h
- Airflow outdoor unit 2100 cm / h
- Refrigerant R407c / 730 g
- High efficiency compressor Rotary
- Sound pressure level (at 3 mts in free field) at average speed 49 dB (A)
- Maximum distance between the 2 units: 30 m
- Interior Dimensions WxDxH mm: 815x360x1030
- External dimensions WxDxH mm: 582x360x460
- Indoor unit weight 86 Kg
- Outdoor unit weight 16,5 Kg
- Power supply: 230/1/50
Images
Split Unit Chillers:
