Round Shape Cooling Tower

About:

Tipo Round shape cooling tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids, other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency. round-shape-cooling-tower-kanchiur. However the higher  the TDS concentration. The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.

Salient Features:

• All structural in HDG Steel to arrest rust
• PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.
• TE / TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft to assist outdoor applications.
• Adjustable pitch axial flow, dynamically balanced aluminum fans to improve the air exhaust at minimum power usage.
• Casings of FRP (Fiber Reinforced Plastics) for durability and strength
• All joints fastened with SS fasteners to arrest rust
• Uniformity in water dispersion through rotary sprinkler
• Capacities 10TR to 1500TR , in single cell
• Water flow 5 m³/h to 1000 m³/h , in a single cell
• 360 °C air intake area assist 100% cooling efficiency
• Delta T (Temperature drop) 4°C to 20°C, in single cell
• ABS Fills for high temperature applications (80 °C)
• Being Bottle Shape with stands High Wind Velocity.
• Eliminators are of special F.R.P. design to reduce carryover to the barest minimum.

Applications:

• Aluminum die casting m/c
• Air compressors
• A/C plant & cold rooms
• Blow molding M/c
• Chemical industries
• Dairy, Citrus and other food processing industries
• Distilleries and Breweries plants
• Diesel / Gas Gen-sets & Megawatt Projects
• Glass Mfg. Plant
• Herbal, Aromatics & extraction plants
• Industries heat process
• Oil refineries
• Plastic injection molding m/c
• PVC pipes manufacturing .plant
• Soap / Cosmetic mfg. industries
• Steel factory and foundry

Round shape Cooling Tower Capacities

Round shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR.

Cooling Tower Maintenance

• Efficient treatment of water
• Prevent scale deposits
• Do way with or clean spray nozzles that get clogged
• Adequate air flow should be ensured
• Adequate performance of pump also should be assured

Round shape Cooling Towers Spares

• PVC Fill                  : A good quality fill and is of long life too.
• Drift Eliminator : The carry over losses due to moisture drops.
• Sprinkler               : Due to the even water distribution over the honey comb fills.

Images: