Round Shape Cooling Tower

About:

Round shape cooling tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids, other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency.  However the higher  the TDS concentration. The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.

Salient Features:

• All structural in HDG Steel to arrest rust
• PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.
• TE / TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft to assist outdoor applications.
• Adjustable pitch axial flow, dynamically balanced aluminum fans to improve the air exhaust at minimum power usage.
• Casings of FRP (Fiber Reinforced Plastics) for durability and strength
• All joints fastened with SS fasteners to arrest rust
• Uniformity in water dispersion through rotary sprinkler
• Capacities 10TR to 1500TR , in single cell
• Water flow 5 m³/h to 1000 m³/h , in a single cell
• 360 °C air intake area assist 100% cooling efficiency
• Delta T (Temperature drop) 4°C to 20°C, in single cell
• ABS Fills for high temperature applications (80 °C)
• Being Bottle Shape with stands High Wind Velocity.
• Eliminators are of special F.R.P. design to reduce carryover to the barest minimum.

Applications:

• Aluminum die casting m/c
• Air compressors
• A/C plant & cold rooms
• Blow molding M/c
• Chemical industries
• Dairy, Citrus and other food processing industries
• Distilleries and Breweries plants
• Diesel / Gas Gen-sets & Megawatt Projects
• Glass Mfg. Plant
• Herbal, Aromatics & extraction plants
• Industries heat process
• Oil refineries
• Plastic injection molding m/c
• PVC pipes manufacturing .plant
• Soap / Cosmetic mfg. industries
• Steel factory and foundry

Round shape Cooling Tower Capacities

Round shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR.

Cooling Tower Maintenance

• Efficient treatment of water
• Prevent scale deposits
• Do way with or clean spray nozzles that get clogged
• Adequate air flow should be ensured
• Adequate performance of pump also should be assured

Round shape Cooling Towers Spares

• PVC Fill                 : A good quality fill and is of long life too.
• Drift Eliminator: The carry over losses due to moisture drops.
• Sprinkler              : Due to the even water distribution over the honey comb fills.

Images: