Round Shape Cooling Tower
About:
Tipo Round shape cooling tower is the circulating water flow that is removed (usually discharged to a drain) in order to maintain the amount of Total Dissolved Solids, other impurities at an acceptably low level. Higher TDS concentration in solution may result from greater cooling tower efficiency. round-shape-cooling-tower-kanchiur. However the higher the TDS concentration. The water that must be added to the circulating water system in order to compensate for water losses such as evaporation, drift loss, blow-out, blow-down, etc.
Salient Features:
- All structural in HDG Steel to arrest rust
- PVC Fills with varying flute sizes of 12 mm, 14 mm, 19 mm, 22 mm to increase the contact surface area.
- TE / TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft to assist outdoor applications.
- Adjustable pitch axial flow, dynamically balanced aluminum fans to improve the air exhaust at minimum power usage.
- Casings of FRP (Fiber Reinforced Plastics) for durability and strength
- All joints fastened with SS fasteners to arrest rust
- Uniformity in water dispersion through rotary sprinkler
- Capacities 10TR to 1500TR , in single cell
- Water flow 5 m3/h to 1000 m3/h , in a single cell
- 360 °C air intake area assist 100% cooling efficiency
- Delta T (Temperature drop) 4°C to 20°C, in single cell
- ABS Fills for high temperature applications (80 °C)
- Being Bottle Shape with stands High Wind Velocity.
- Eliminators are of special F.R.P. design to reduce carryover to the barest minimum.
Applications:
- Aluminum die casting m/c
- Air compressors
- A/C plant & cold rooms
- Blow molding M/c
- Chemical industries
- Dairy, Citrus and other food processing industries
- Distilleries and Breweries plants
- Diesel / Gas Gen-sets & Megawatt Projects
- Glass Mfg. Plant
- Herbal, Aromatics & extraction plants
- Industries heat process
- Oil refineries
- Plastic injection molding m/c
- PVC pipes manufacturing .plant
- Soap / Cosmetic mfg. industries
- Steel factory and foundry
Round shape Cooling Tower Capacities
Round shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR.
Cooling Tower Maintenance
- Efficient treatment of water
- Prevent scale deposits
- Do way with or clean spray nozzles that get clogged
- Adequate air flow should be ensured
- Adequate performance of pump also should be assured
Round shape Cooling Towers Spares
- PVC Fill : A good quality fill and is of long life too.
- Drift Eliminator : The carry over losses due to moisture drops.
- Sprinkler : Due to the even water distribution over the honey comb fills.
Images:
