Casketed Plate Heat Exchanger Spare Parts And Accessories
Compact, Efficient and Economical Heat Exchangers
Tipo Heat Exchangers share one thing in common—heat transfer through plates instead of tubes. Even our Spiral Heat Exchanger transfers heat through two spirally wound plates. Turbulent flow at low velocity produces high heat transfer efficiency and low fouling. The result…compact units with small heat transfer areas compared to conventional shell & tube exchangers. Plate exchangers conserve both material and labour resources, reducing up-front costs and future operational costs.
Insulated Shrouds – Heat Exchangers
Shrouds improve thermal efficiency, saving boiler fuel. They also provide personnel with protection from hot and sharp surfaces.
Shrouds improve thermal efficiency, saving boiler fuel. They also provide personnel with protection from hot and sharp surfaces.
Instruments And Gauges – Heat Exchangers
Special flanges are available with outlets for drainage and ventilation, pressure gauges and sensors.
Special flanges are available with outlets for drainage and ventilation, pressure gauges and sensors.
Drip Pans – Heat Exchangers
Drip pans prevent water and other liquids from draining onto the floor when dismantling the heat exchanger.
Drip pans prevent water and other liquids from draining onto the floor when dismantling the heat exchanger.
Port Strainers – Heat Exchangers
A strainer protects the plate pack from large particles that would otherwise foul and clog the channels. The length is adapted to the number of plates.
A strainer protects the plate pack from large particles that would otherwise foul and clog the channels. The length is adapted to the number of plates.
Tie-Rod Protectors – Heat Exchangers
Special covers protect personnel from coming in contact with sharp tie bolt threads, enhancing safety around the unit.
Special covers protect personnel from coming in contact with sharp tie bolt threads, enhancing safety around the unit.
Gaskets – Heat Exchangers
NBR or EPDM gaskets are offered as standard. Maximum temperature with NBR gaskets is 140°C (284°F) or EPDM 170°C (338°F). Other material options include FKM, HNBR, butyl, neoprene, Teflon encapsulated NBR, and others.
NBR or EPDM gaskets are offered as standard. Maximum temperature with NBR gaskets is 140°C (284°F) or EPDM 170°C (338°F). Other material options include FKM, HNBR, butyl, neoprene, Teflon encapsulated NBR, and others.
Other Accessories – Heat Exchangers
Backflush Valves
Wrenches
Grounding Lugs
Molybdenum bolt coatings
Hex Wrap Insulation
Wrenches
Grounding Lugs
Molybdenum bolt coatings
Hex Wrap Insulation
Shell & Plate Cleaning Wand – Heat Exchangers
The DPW Series of deep-draw plates features a pressure- and mechanically cleanable, straight-through, shell-side flow path. A cleaning wand accessory combines both fluid jet and polymer brush cleaning using a cleaning solution appropriate to the plate side fluid.
The DPW Series of deep-draw plates features a pressure- and mechanically cleanable, straight-through, shell-side flow path. A cleaning wand accessory combines both fluid jet and polymer brush cleaning using a cleaning solution appropriate to the plate side fluid.
Shell & Plate Shrouds – Heat Exchangers
For personnel safety, energy efficiency or low-temperature thermal control, the Tranter Shell & Plate Heat Exchanger can be fitted with an insulated aluminium shroud.
For personnel safety, energy efficiency or low-temperature thermal control, the Tranter Shell & Plate Heat Exchanger can be fitted with an insulated aluminium shroud.