FRP Multi Cell Cooling Towers Manufacturers in Coimbatore

A cooling tower is a heat rejection device that rejects waste heat to the atmosphere through the cooling of a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of closed circuit dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature. Common applications include cooling the circulating water used in oil refineries, petrochemical and other chemical plants, thermal power stations, nuclear power stations and HVAC systems for cooling buildings. The classification is based on the type of air induction into the tower: the main types of cooling towers are natural draft and induced draft cooling towers.Cooling towers vary in size from small roof-top units to very large hyperbolic structures (as in the adjacent image) that can be up to 200 meters (660 ft) tall and 100 meters (330 ft) in diameter, or rectangular structures that can be over 40 meters (130 ft) tall and 80 metres (260 ft) long.Although these large towers are very prominent, the vast majority of cooling towers are much smaller, including many units installed on or near buildings to discharge heat from air conditioning.FRP Multi Cell Cooling Tower belongs to the series of Counter-Flow Rectangular Shaped Cooling towers. These type of Cooling Towers is made by the combination of more number of single Cell Cooling Towers and facilitates minimum drift loss because of fully covering drift eliminators. Our FRP Multi Cell Cooling Towers makes low noise and vibration. Also, we make it available at affordable prices.

Features