Fanless Filles Cooling Towers
The name “FAN LESS FILL LESS”says it all. Devoid of either the fan or the fill media these towers are guaranteed for 100% savings in power & maintenance down time.
Technical Function
The Hot water from the heat source is circulated to the inlet header of the Cooling Tower. The inlet header pipes have branches and sub branches covering the internal area of the cooling towers. The non clog nozzles are connected at the outlets of the sub branch piping’s.
At a inlet pressure of 1 – 1.5 Kg/cm2 to the Cooling Tower, the hot waters are atomized to a mist state. The nozzles are self designed to create more pressure thereby converting water into minute atomized particles. From the four sides of the louvers, plenty of fresh air is automatically circulated by the aero dynamic designed FRP louvers. Waters are directed by the special aero dynamic louvers towards the collection sump. The louvers ensure that the water do not spill out of the towers.
The hot waters, that are in a mist state, comes directly in to contact with the ambient air and the cooling is achieved mainly by, the portion of water, that gets converted to vapors, thus caring away the latent heat of evaporation. Therefore, water gets cooled and in this process, the air gets heated, saturated and thereby caring away some sensible heat from water.
Salient Features:
Eliminates fill media and hence maintenance
Eliminates motor / fan and hence power consumption
Used for high temperature applications
Used for industries having polluted waters
All structural in HDG Steel, to arrest rust
All joints with SS fasteners
Aero dynamic designed FRP / GI louvers
Capacities 10TR to 1000TR, in a single cell
Water flow 10CMH to 1000 CMH, in a single cell
Delta T temperature drop 4 Deg C to 30 Deg C, in a single cell
Specially designed non clog nozzles to atomize water to mist