Cross Flow Cooling Tower
Introduction
The Cross Flow Cooling Tower design incorporates a FRP distribution basin with number of flower type target nozzles in it and is located at the tower top. The water, by gravity, is dispersed over the fill media uniformly and water is allowed to pass vertically down along the honey comb fills. The fan coupled directly to the motor is placed horizontally to draw air across the fill media. A small portion of water is evaporated which removes the heat from the remaining water.
Features for Cross Flow Cooling Tower
- Easy maintenance by design
- Do not require any elaborate pillar foundations, can be placed on any flat surface
- All structural in HDG Steel, SS 304 and SS 316 available upon request.
- Adjustable pitch axial flow, dynamically balanced aluminum fans
- Casings of FRP (Fibre Reinforced Plastics) for durability and strength
- All joints fastened with SS 304 fasteners
- Uniformity in water dispersion through flower pot target nozzles
- Capacities 10TR to 1500TR , in single cell
- Water flow 5 m3/h to 1000 m3/h, in single cell
- Delta T (Temperature drop) 4°C to 20°C, in single cell
Air Distribution:
The fan motors are totally enclosed weather proof type. The motors are mounted on easily adjustable base located inside the fan stack ensuring lower noise level. Fan Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Materials chosen are non corrosive of plastic, FRP or aluminium alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is factory set and dynamically balanced.
Water Distribution Fills:
The fill is rigid Polyvinyl Chloride (PVC) and is honeycomb design with very large contact surface area. The fills split the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without any cutting for curves. The air pressure drop through the fill is negotiable. The fills are available with flute height of 6 mm, 12 mm, and 19 mm with sheet thickness of 1 mm and 1.2 mm.
Structure for Cross Flow Cooling Tower
Frame All supporting structures are hot-dip galvanized steel to minimize rusting and corrosion ensuring long life.
Casing Made of Fiberglass Reinforced Polyester (FRP), it is lightweight, easy to assemble, no painting required and thus reducing maintenance cost.
Inspection doors are furnished to provide convenient access to the interior for inspection, maintenance, adjustment of float valve, cleaning of lift-out strainer and flushing out the sump.
Applications
- HOSPITALS, MALLS, THEATERS
- Air Conditioned Halls
- A/C plant & cold rooms
- Chemical industries
- Dairy ,Citrus and other food processing industries
- Industries heat process
- Oil refineries
Images
Cross Flow Cooling Tower
.JPG)
