Round / Bottle Shape Cooling Towers:
- The Round Shape FRP Cooling Towers Also Calles As Bottle Shape Cooling Towers.
- The Casing and Basins Are Designed to Withstand Severe Vibrations, High Wind Load And to Resist Corrosion.
- The Cooling Towers Consists of Honeycomb PVC Fills in Design That Maximum Economy and Efficiency and Directly Driven Fan and Motor “minimum Drift Losses” Uniform Distribution of Hot Water by Rotating Arm Sprinkler.
Hot Dipped Galvanized Hardware to Withstand Wind Forces. The Bottle Shape Makes Possible to Provide Maximum Cooling Efficiency in Minimum Plan Area with Lower Energy Consumption. - Round Shape Cooling Tower That Performs Under Induced Draft Counter Flow Principle for The Operation.
- The Hot Water Enters Through Hot Water Inlet That Passes Through Sprinkler by Perforated Branch Pipe Which Distributes the Water Evenly.
- This Water Is Spread Over the Heat Exchange Fills. Then, The Water Flows Downward
- As A Thin Film Through the Direct Contact with Ambient Air Moving Upwards in A Counter Flow Direction.
We Offer Round Shape Cooling Tower In Range Of
5 Tr To 300 Tr Capacities To Cool Water From
3 rn3/ Hr To 200 ’ / Hr In Range
Of 8 °C To 10 “C Temperature Difference.
We Have 15 Models In 5 Tr To 300 Tr Cooling Tower Capacities.
SQUARE SHAPE COOLING TOWERS
- The Square Shape Cooling Towers Designed Especially for An Alternative to Round Model for Selection To Our Buyers. The Cooling Towers Consists Of Honeycomb PVC Fills And Eliminators In A Design That Maximizes Economy And Efficiency And Directly Driven Fan And Motor With Spray Nozzles Minimum Drift Loss.
- Hot Dipped Galvanized Hardware With Rectangular Casing Body In Elegant Design.
- Square Shape Cooling Tower That Performs Under Induced Draft Counter Flow Principle For The Operation.
- The Hot Water Enters Through Hot Water Inlet That Passes Through Nozzles Which Distributes The Water Evenly. This Water Is Spread Over The Heat Exchange Fills. Then The Water Flows Downward As A Thin Film Through The Fill-In Direct Contact With Ambient Air Moving Upwards In A Counter Flow Direction.
- We Offer Cooling Tower In Rang Of
- 5 Tr To 750 Tr Capacities To Cool Water From
- 3 rni/ hr To 450 m3 / hr In Range Of
- 8 °C To 10 °C Temperature Difference & For More Than We Can Give In Multi Cell Cooling Tower In Any Range.
- We Have
- 18 Models In 5 Tr To 750 Tr Cooling Tower Capacities. The Square Shape Cooling Towers Designed Especially for An Alternative To Round Model For Selection To Our Buyers. The Cooling Towers Consists Of Honeycomb PVC Fills And
- Eliminators In A Design That Maximizes Economy And Efficiency And Directly Driven Fan And Motor With Spray Nozzles Minimum Drift Loss.
- Hot Dipped Galvanized Hardware With Rectangular Casing Body In Elegant Design.
Square Shape Cooling Tower That Performs Under Induced Draft Counter Flow Principle For The Operation. The Hot Water Enters Through Hot Water Inlet That Passes Through Nozzles Which Distributes The Water Evenly. This Water Is Spread Over The Heat Exchange Fills. Then The Water Flows Downward As A Thin Film Through The Fill-InDirect Contact With Ambient Air Moving Upwards In A Counter Flow Direction.
- We Offer Cooling Tower In Rang Of
- 5 Tr To 750 Tr Capacities To Cool Water From
- 3 rni/ hr To 450 m3 / hr In Range Of
- 8 °C To 10 °C Temperature Difference & For More Than We Can Give In Multi Cell Cooling Tower In Any Range.
- We Have
- 18 Models In 5 Tr To 750 Tr Cooling Tower Capacities.