Cooling Tower Sprinklers
We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2″ to 12″ with 4 way sprinkler; these are Good quality, reliable in use.
Sprinkler Assembly
The sprinkler assembly is constructed of 100% non corrosive material. Mounted on the top of a centre 2stand pipe, the sprinkler assembly distributes the water evenly through 4, 6 or 8 distribution tubes. A minimal 7 pound head pressure is required to ensure proper rotation. The specific RPM can be obtained by adjusting the distribution tube angle. Refer to the table in paragraph 4.2 for RPM requirements.
sprinkler Head
The sprinkler Head is constructed of 100% non corrosive material. Mounted on the top of a centre stand pipe, the sprinkler assembly distributes the water evenly through 4, 6 or 8 sprinkler tubes.
We offer an excellent Cooling Tower Sprinkler in Cooling Towers to distribute the hot water uniformly over the PVC fills. These are specially designed to achieve maximum water sprinkling at the tip of nozzles with minimum pressure drop/ by gravity. Available in different sizes depending on the cooling tower, the spacing in between the nozzles is such that it covers the maximum area of tower. The heads and branches are made of heavy duty PVC while on the other side the nozzles are made from high density poly propylene, thus eliminating the risk of corrosion.
Product Details
Cooling tower sprinkler head is an important part of counter-flow round cooling tower water distribution system, it is located the overhead of cooling tower packing, connects the hose of the center water pipe and the cooling tower distribution pipes. Its role is to make water evenly spreaded to cooling tower infill to make sure better cooling effect of the cooling tower.
Tipo Heat Exchangers sprinkler head is using imported bearing, with double bearing deisgn, stable operation and surperior performance characteristics, applicable in many brand 8-1000 RT cooling towers.