Tipo Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers-Heat Exchangers Manufacturers, Cooling Towers Manufacturers, and Industrial Chillers Manufacturers

Monthly Archives: June 2024

Cooling Towers supplier in UAE

Forced draft In forced draft cooling towers, air is “pushed” through the tower from an inlet to an exhaust. A forced draft mechanical draft tower is a blow-through arrangement, where a blower type fan at the intake forces air through the tower. The forced draft cooling towers have certain disadvantages: 1. The blower forces outside...

Cooling towers in United Arab Emirates

Cooling Tower Terms and Definitions Some useful terms, commonly used in the cooling tower industry: 1. BTU (British thermal unit) – BTU is the heat energy required to raise the temperature of one pound of water one degree Fahrenheit in the range from 32° F to 212° F. 2. Cooling Range – The difference in […]

Cooling towers in UAE

Components of Cooling Tower The basic components of an evaporative tower are: Frame and casing, fill, cold water basin, drift eliminators, air inlet, louvers, nozzles and fans. Frame and casing: Most towers have structural frames that support the exterior enclosures (casings), motors, fans, and other components. With some smaller designs, such as...

Cooling tower Manufacturer in UAE

Cooling towers are a very important part of many chemical plants. The primary task of a cooling tower is to reject heat into the atmosphere. They represent a relatively inexpensive and dependable means of removing low-grade heat from cooling water. The make-up water source is used to replenish water lost to evaporation. Hot water from […]
1 … 3 4