Daily Archives: June 4, 2024

Home
/
2024
/
June
/
04

Cooling Towers in Saudi Arabia

We are manufacturer and Supplier of Cooling Towers in Saudi Arabia, we can manufacture, supply and deliver a good quality Cooling Towers in Saudi Arabia Forced draft The forced draft benefit is its ability to work with high static pressure. They can be installed in more confined spaces and critical layout situations. These can be […]

Closed Circuit cooling towers in United Arab Emirates

Why Evaporative Cooling? The advantages of evaporative cooling stem from several key factors. First, evaporative cooling process use the ambient wet-bulb temperature of the entering air as the heat sink, which is typically 10°F to 30°F lower than the dry bulb, depending on the local climate. The lower the temperature of the heat sink, the...

Closed Circuit cooling towers in UAE

Closed Circuit cooling tower is also known as Evaporative Cooling Tower. An evaporative cooling tower is a heat exchanger that transfers heat from circulating water to the atmosphere. Warm water from the heat source is pumped to the top of the tower and will than flow down through plastic or wooden shells. As it falls […]

Cooling Towers supplier in UAE

Forced draft In forced draft cooling towers, air is “pushed” through the tower from an inlet to an exhaust. A forced draft mechanical draft tower is a blow-through arrangement, where a blower type fan at the intake forces air through the tower. The forced draft cooling towers have certain disadvantages: 1. The blower forces outside...

Cooling towers in United Arab Emirates

Cooling Tower Terms and Definitions Some useful terms, commonly used in the cooling tower industry: 1. BTU (British thermal unit) – BTU is the heat energy required to raise the temperature of one pound of water one degree Fahrenheit in the range from 32° F to 212° F. 2. Cooling Range – The difference in […]

1 2 Next