Daily Archives: September 25, 2017

Finned Tube Heat Exchangers   FINNED TUBE HEAT EXCHANGERS OVERVIEW: Finned Tube Heat Exchangers for applications that require high heat transfer area for relatively low heat transfer fluids. The advantages of using these finned tube heat exchangers are that they are compact. Our integrally finned tube heat exchangers can be used in...

Double Pipe Heat Exchangers A double pipe heat exchanger, in its simplest form is just one pipe inside another larger pipe. One fluid flows through the inside pipe and the other flows through the annulus between the two pipes. The wall of the inner pipe is the heat transfer surface. The pipes are usually doubled […]

Plate Fin Heat Exchanger Our aluminium plate-fin heat exchangers (PFHE) are key components in many process plants. Their compact footprint helps save space and costs in a wide range of facilities, including air separation plants, petrochemical and gas treatment plants as well as natural gas and helium liquefaction plants. Our PFHEs are brazed in...

Air Blast Oil Cooler Functions of compressed air after coolers : – Cool air discharged from air compressors via the heat exchanger Reduce risk of fire (Hot compressed air pipes can be a source of ignition) Reduce compressed air moisture level Increase system capacity Protect downstream equipment from excessive heat Coolers are usually sized with...

After Cooler Heat Exchangers Water or moisture is not desirable in the transmission lines of an air compression system. Water carried through the lines washes away lubricating oil from the tools the compressed air is running. This causes the tools to operate sluggishly & increases the need for maintenance. The effect is compounded in high...